specifications subject to change without notice. please check our website for latest information. chip inductors - 0805ls series (2012) document 288-1 document 288-1 revised 11/12/04 these ferrite core surface mount inductors have lower dcr and higher current ratings than our 0805cs series. they come in inductance values from 0.078 to 27 h. inductance 2 percent srf min 4 dcr max 5 i rms 6 color part number 1 (h) tolerance q min 3 (mhz) (ohms) (a) code 0805ls-78nx_b_ 0.078 @ 7.9 mhz 5,2 19 @ 7.9 mhz 1440 0.042 2.0 black 0805ls-111x_b_ 0.110 @ 7.9 mhz 5,2 19 @ 7.9 mhz 1200 0.05 2.0 brown 0805ls-471x_b_ 0.470 @ 7.9 mhz 5,2 19 @ 7.9 mhz 500 0.31 0.720 red 0805ls-681x_b_ 0.680 @ 7.9 mhz 5,2 20 @ 7.9 mhz 400 0.46 0.590 orange 0805ls-102x_b_ 1.0 @ 7.9 mhz 5,2 20 @ 7.9 mhz 340 0.69 0.500 yellow 0805ls-152x_b_ 1.5 @ 7.9 mhz 5,2 20 @7.9 mhz 275 0.83 0.490 green 0805ls-182x_b_ 1.8 @ 7.9 mhz 5,2 20 @ 7.9 mhz 246 1.15 0.410 blue 0805ls-222x_b_ 2.2 @ 7.9 mhz 5,2 20 @ 7.9 mhz 106 1.28 0.365 brown 0805ls-272x_b_ 2.7 @ 7.9 mhz 5,2 20 @ 7.9 mhz 105 1.48 0.350 violet 0805ls-332x_b_ 3.3 @ 7.9 mhz 5,2 20 @ 7.9 mhz 83 1.57 0.330 gray 0805ls-392x_b_ 3.9 @ 7.9 mhz 5,2 20 @ 7.9 mhz 52 1.70 0.300 white 0805ls-472x_b_ 4.7 @ 7.9 mhz 5,2 20 @ 7.9 mhz 50 1.87 0.280 black 0805ls-682x_b_ 6.8 @ 7.9 mhz 5,2 20 @ 7.9 mhz 35 2.25 0.260 brown 0805ls-822x_b_ 8.2 @ 2.5 mhz 5,2 18 @ 2.5 mhz 27 2.55 0.250 red 0805ls-103x_b_ 10.0 @ 2.5 mhz 5,2 18 @ 2.5 mhz 21 3.45 0.200 orange 0805ls-153x_b_ 15.0 @ 2.5 mhz 5,2 18 @ 2.5 mhz 17 5.03 0.180 yellow 0805ls-223x_b_ 22.0 @ 2.5 mhz 5,2 18 @ 2.5 mhz 13 6.18 0.150 green 0805ls-273x_b_ 27.0 @ 2.5 mhz 5,2 15 @ 2.5 mhz 11 11.04 0.120 blue coilcraft designer?s kit c154 contains samples of all 5% inductance tolerance parts. to order, contact coilcraft or visit http://order.coilcraft.com to purchase on-line. 2. inductance measured using a coilcraft smd-a fixture in an agilent/ hp 4286a impedance analyzer. 3. q measured on an agilent/hp 4291a with an agilent/hp 16193 test fixture. 4. srf measured using an agilent/hp 8753d network analyzer with a coilcraft smd-d test fixture. 5. dcr measured on a cambridge technology micro-ohmmeter. 6. average current for 15c temperature rise above 25c ambient. 7. operating temperature range ? 40c to +85c. 8. electrical specifications at 25c. see qualification standards section for environmental and test data. 1. when ordering, please specify tolerance and packaging codes: 0805ls-273x j b c tolerance: g =2% j = 5% (table shows stock tolerances in bold.) packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (2000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead.
specifications subject to change without notice. please check our website for latest information. document 288-2 document 288-2 revised 12/14/04 0805ls series chip inductors a max b max c max d ref e f g h i j 0.090 0.075 0.063 0.020 0.050 0.020 0.040 0.070 0.040 0.030 2,29 1,91 1,60 0,51 1,27 0,51 1,02 1,78 1,02 0,76 i i j h a b overall f g e terminal f c d terminal wraparound: approx 0.010/0,25 both ends recommended land pattern typical l vs frequency typical q vs frequency weight: 12.7 ? 13.9 mg terminations: platinum/palladium/silver tape and reel: 2000/7 reel 8 mm tape width for packaging data see tape and reel specifications section.
|